Elder Project LP offers high-tech equipment for processes that are connected with as surface as underground mining falls.
Surface Mining Equipment
Highwall miner
Highwall miner 300
Highwall miner is mining machines that extract coal from exposed seams. The highwall miners rotate up and down a wall, grinding mineral deposits out of the walls. These mining tools are also used for trench mining.
The HIGHWALL MINER 300 highwall mining system is a machine designed to optimize highwall coal mining. Built for reliable performance in challenging conditions, the unit can penetrate up to 305 m in a coal seam, allowing your crew to make the most of open cast, trench and contour mining environments.
Highwall Mining System - 225000 kg
Width - 11.5 m
Height - 8.5 m
The HIGHWALL MINER 300 highwall mining system is a machine designed to optimize highwall coal mining. Built for reliable performance in challenging conditions, the unit can penetrate up to 305 m in a coal seam, allowing your crew to make the most of open cast, trench and contour mining environments.
Highwall Mining System - 225000 kg
Width - 11.5 m
Height - 8.5 m
Blasthole drills
are mining machines that drill holes into the earth’s surface for placing explosives.
are mining machines that drill holes into the earth’s surface for placing explosives.
Blasthole drill PV-M3
These units have drilled millions of meters in coal overburden, but that’s not all it can do. These rigs are also well suited for punching holes in hard rock, day in and day out.
Main application area - Blasthole drilling in open-pit mining
Drilling method - Multi-pass
Single-pass depth - 11,3 m
Maximum hole depth - 71,6 m
Weight on bit - 40 823 kg
Pulldown capacity - 0 kN - 400 kN
Pullback capacity - 0 kN - 185 kN
Main application area - Blasthole drilling in open-pit mining
Drilling method - Multi-pass
Single-pass depth - 11,3 m
Maximum hole depth - 71,6 m
Weight on bit - 40 823 kg
Pulldown capacity - 0 kN - 400 kN
Pullback capacity - 0 kN - 185 kN
Blasthole drill PV-231
It is a flexible workhorse that can be configured in many different ways for a wide range of rotary and DTH drilling operations. It's extremely fuel-efficient – which can add up to significant savings.
Main application area - Rotary blasthole drilling
Drilling method - Rotary and DTH
Single-pass depth - 16,1 m
Maximum hole depth - 37,5 m
Weight on bit - 29 120 kg
Pulldown capacity - 0 kN - 267 kN
Pullback capacity - 0 kN - 120 kN
Main application area - Rotary blasthole drilling
Drilling method - Rotary and DTH
Single-pass depth - 16,1 m
Maximum hole depth - 37,5 m
Weight on bit - 29 120 kg
Pulldown capacity - 0 kN - 267 kN
Pullback capacity - 0 kN - 120 kN
Blasthole drill PV-310
A combination of increased pulldown force, rotary torque, and 2600 cfm airend, the unit drill rig is one of the most powerful drills for blasthole drilling.
Main application area - Rotary blasthole drilling
Drilling method - Rotary Single-pass
Single-pass depth - 18 m
Maximum hole depth - 18 m
Weight on bit - 38 555 kg
Pulldown capacity - 0 kN - 355,8 kN
Pullback capacity - 0 kN - 156 kN
Main application area - Rotary blasthole drilling
Drilling method - Rotary Single-pass
Single-pass depth - 18 m
Maximum hole depth - 18 m
Weight on bit - 38 555 kg
Pulldown capacity - 0 kN - 355,8 kN
Pullback capacity - 0 kN - 156 kN
Blasthole drill PV-30
It offers high reliability and production with purpose-built structures, a high horsepower engine and large capacity dual-setting compressor that adapts to varying rock hardness conditions.
Hole diameter - 140 mm-216 mm
Single pass - 6.1 m
Multi pass - 42.7 m (Up to 4.5” pipe) / 30.5 m (Up to 5.5” pipe)
Hole diameter - 140 mm-216 mm
Single pass - 6.1 m
Multi pass - 42.7 m (Up to 4.5” pipe) / 30.5 m (Up to 5.5” pipe)
Blasthole drill RZ-85
The RZ-122 features rugged and reliable rotary carriages, a powerful, precise rack-and-pinion pulldown system, and an enclosed boxer mast; this drill delivers ample torque and bit loading for tough rock conditions.
Hole diameter - 270 mm-349 mm
Single pass - 19.8 m
Multi pass - 85 m
Hole diameter - 270 mm-349 mm
Single pass - 19.8 m
Multi pass - 85 m
Bucket-wheel excavators
are used in open-pit mining. These mining tools continuously dig, transport, and load materials, excavating up to 240,000 cubic tons of minerals per day.
are used in open-pit mining. These mining tools continuously dig, transport, and load materials, excavating up to 240,000 cubic tons of minerals per day.
Bucket-wheel excavator P100
This compact machine line is widely used for lignite mining, material handling, and heap leaching processes. It employs a special type of counterweight located below the discharge boom to minimise luffing in cylinder forces. Hydraulic cylinders provide boom hoisting.
Standard features
- Counterweight below the discharge boom reduces machine size and improves stability
- Two-crawler undercarriage travel mechanisms offer flexibility
- Crawler undercarriage tailored to customer requirements
- Boom hoisting with hydraulic cylinders for simplicity and reliability
Technical data
- Belt width - 800 mm – 2,000 mm
- Block height - 8 m – 25 m
- Boom length - 20 m – 40 m
- Capacity - up to 7,500 m3 per hour
Bucket-wheel excavator K100
The compact bucket wheel excavator is the smallest one from the machines being offered. The entire machine moves by means of a crawler undercarriage. The lifting system for the bucket wheel boom is hydraulically driven as that for the loading boom. The machine is ready for transport to a destination as a whole without having to be largely broken down into its parts.
Main parameters of machine
Main parameters of machine
- Bucket volume - 100 dm3
- Belt width - 800 mm
- Theoretical output of machine - 400 m3/h
- Effective output of machine - 200 m3/h
- Total weight - 74 t
- Installed power - 190 kW
- Length of bucket wheel boom - 6,000 mm
- Length of loading boom - 11,000 mm
Underground Mining Equipment
Continuous miners
are a type of mining equipment used in room and pillar mining, and have a large rotating drum with carbide teeth to scrape coal from seams. These mining tools can mine up to five tons of coal a minute and account for approximately 45% of underground coal production. They also have conveyor belts that transport coal, making this an automated process that is controlled remotely.
are a type of mining equipment used in room and pillar mining, and have a large rotating drum with carbide teeth to scrape coal from seams. These mining tools can mine up to five tons of coal a minute and account for approximately 45% of underground coal production. They also have conveyor belts that transport coal, making this an automated process that is controlled remotely.
Continuous miner CM2
- Engineered for reliable performance in mines running continuous haulage or cutting higher percentages of rock. Designed for narrow entry and low- to mid-seam applications, this machine is available with high voltage options and various minimum and maximum cutting heights.
- With multiple available models, a CM2 continuous miner can be applied in your low- to mid-seam applications.
- With both solid and Ripperveyor cutting heads available, the CM2 is ready for tough mining applications.
- A fine water spray behind each cutting bit on the cutter drums reduces the potential for frictional ignitions and reduces respirable dust levels.
- Maximize your productivity, work with us to create a cutting system that is ideal for your application.
Continuous miner F-500
It is a new generation shearer loader, which was developed by combining the advanced technological solutions, expertise, modern technologies and the highest grade materials. Thanks to the modular design transport dimensions are minimised, which did not diminish the powerful capability of the shearer and the ability to work in high seams (mining height up to 6.0 m).
This shallow web shearer loader can operate with a face conveyor with a width of 900 to 1200 mm. The design of the feed system allows for different shearer heights without changing hauling frames. It is used for bidirectional niche-free coal mining and loading in a longwall system, with the strike of up to 35°, the dip up to 25°, the upwards up to 15° and downwards.
This shallow web shearer loader can operate with a face conveyor with a width of 900 to 1200 mm. The design of the feed system allows for different shearer heights without changing hauling frames. It is used for bidirectional niche-free coal mining and loading in a longwall system, with the strike of up to 35°, the dip up to 25°, the upwards up to 15° and downwards.
Continuous miner KCV-1500
KCV-1500 is a double ranging arm shearer with electric haulage drive. The shearer is carried along the length of the face on the armoured face conveyor (AFC) in a chainless haulage system. The shearer route is 860–1100 mm wide. It is designed for bidirectional cutting and loading coal in a longwall mining system.
KCV-1500 is adapted to longwall mining operations in seams inclined up to 35° longitudinally, up to 20° transversely (upwards) and up to 12° transversely (downwards).
KCV-1500 is adapted to longwall mining operations in seams inclined up to 35° longitudinally, up to 20° transversely (upwards) and up to 12° transversely (downwards).
Continuous miner MC430
High installed cutting power of 400kW for maximized cutting performance
Increased cutting time due to shear-up cutting and large bunker capacity on loader table
Efficient spraying system for highest safety and dust control
Radio remote control with backup data logger for productivity control
Cutter motor power - 400 kW
Loading capacity - 40 t/min
Ground pressure - 0.19 MPa
Chassis height - 12 m
Conveyor width - 960 mm
Cutting height (max) - 4,000 mm
Cutting height (min) - 1,800 mm
Cutting width - 3,800 mm
Motor power - 152 kW
Loader and conveyor motor power
Increased cutting time due to shear-up cutting and large bunker capacity on loader table
Efficient spraying system for highest safety and dust control
Radio remote control with backup data logger for productivity control
Cutter motor power - 400 kW
Loading capacity - 40 t/min
Ground pressure - 0.19 MPa
Chassis height - 12 m
Conveyor width - 960 mm
Cutting height (max) - 4,000 mm
Cutting height (min) - 1,800 mm
Cutting width - 3,800 mm
Motor power - 152 kW
Loader and conveyor motor power
Longwall mining machines
are the most common machines used in underground coal mining. These mining tools are used to build underground galleries and tunnels by leveraging the machine’s shearing capabilities.
are the most common machines used in underground coal mining. These mining tools are used to build underground galleries and tunnels by leveraging the machine’s shearing capabilities.
Longwall Shearer LS0A
The harsh, unpredictable conditions of underground mining demand reliable machines that can adapt. These shearers are designed so you can depend on them to be not only consistently productive, but also versatile. Modular design makes these shearers easy to transport. With an array of seam ranges and arm power options to choose from, select the specs you need to do your job quickly and effectively.
- Cutting height 1.5 - 3.9 m
- Machine height 1.0 - 1.3 m
- Machine weight 35 000 kg
- Haulage pull 625 kN
- Pump motor power 2x12 kW
- Haulage motor power 2x60 kW
- Maximum cutting motor power 2x335 kW
Forklifts
are versatile in underground mining. These mining machines can be used to load explosives and carry other heavy loads and mining equipment.
are versatile in underground mining. These mining machines can be used to load explosives and carry other heavy loads and mining equipment.
FL-10
Articulated forklift for underground mining operations with a capacity of 4.5 metric tons.
Capacity - 4,535/610 kg/mm
Lift height - 2,235 mm
Unloaded weight - 8,140 kg
Weight on front axle (laden) - 10,800 kg
Weight on front axle (unladen) - 3,385 kg
Weight on rear axle (laden) - 1,865 kg
Weight on rear axle (unladen) - 4,750 kg
Top speed - 10 km/h
Lifting speed - 457 mm/s
FL-25
- One of the workhorses of smart forklift. Designed to adapt to any industry or terrain, and built with the heart of a lion to deliver a lifetime of dependable service
Capacity - 11,339/610 kg/mm
Lift height - 4,267 mm
Unloaded weight - 18,551 kg
Weight on front axle (laden) - 26,489 kg
Weight on front axle (unladen) - 7,756 kg
Weight on rear axle (laden) - 3,401 kg
Weight on rear axle (unladen) - 10,795 kg
Top speed - 28 km/h
Lifting speed - 335 mm/s
FL-25
This is one of the strongest four-wheel-drive articulated lift trucks on the market. Combining robustness, power and adaptability, it is ideal for handling heavy loads on uneven surfaces or in tight spaces.
Capacity - 12,473/610 kg/mm
Lift height - 4,267 mm
Unloaded weight - 19,629 kg
Weight on front axle (laden) - 28,648 kg
Weight on front axle (unladen) - 7,166 kg
Weight on rear axle (laden) - 4,399 kg
Weight on rear axle (unladen) - 12,519 kg
Top speed - 28 km/h
Lifting speed - 426 mm/s
Other Mining Tools
We offer a number of other mining tools that are used in both surface and underground mining.
Mine chute
Manufactured to optimize material flow, reduce hang-ups and extend service life through a wide range of materials and abrasion-resistant liners. Available with proven wear technologies provided by our trusted partners.
Highwall Mining System - 225000 kg
Width - 11.5 m
Width - 11.5 m
Height - 8.5 m
Screen
Horizontal/Low Angle Screens can help in reducing conveyor heights, provide space for taller feed hoppers and can be installed where headroom is at a premium.
Our Horizontal Screens are driven by the 2 of 4 shafted units which impart a three-way motion to the screen with horizontal, vertical and elliptical components providing high capacity, fast conveying and sharper sizing.
With the vibrator unit mounted above the machine, this allows for better access between the decks for maintenance and deck changes and are typically installed around 0-5 degrees downhill.
With the vibrator unit mounted above the machine, this allows for better access between the decks for maintenance and deck changes and are typically installed around 0-5 degrees downhill.
Our standard size of Horizontal screens ranges from 1.0 – 3.0m in width and 2.0m - 9.6m in length and are available in single and multi-deck arrangements however the majority of Hewitt Robins Horizontal Screens are custom designed to fit into existing structures and buildings when current machines are in need of replacement.
Conveyor belt DY-II
Belt Conveyor is a kind of conveying machine which transport materials from one place to another place continuously. Belt conveyor machine consist of conveyor frame, conveyor belt, conveyor pulley, conveyor rollers, tension devices, driving unit and other components etc. Belt conveyor system can transport materials in bulk and bagged, such as stone, sand, coal, concrete, cement, gravel, fertilizer, mineral ore, limestone, coke, sawdust, wood chip, bulk material, grain, corn flakes, carbon black, etc.
Belt Width - 500/650/800/1000mm
Conveying Distance - 3-30m
Belt Speed - 0.80/1.00/1.25/1.60/2.00/2.50m/s
Lifting Height - 0.8~12.5m
Conveying Distance - 3-30m
Belt Speed - 0.80/1.00/1.25/1.60/2.00/2.50m/s
Lifting Height - 0.8~12.5m
Capacity - 25~550m³
Conveyor belt-portable
Portable belt conveyors were built to withstand the rugged conditions of any job site. It can be used for transport bulk material or bags. It can be divided into rise-and-fall and non rise-and-fall type, according to different transport requirements, the transport system can be single belt conveyor or consist of several conveyors or be combined with other conveying equipment, in addition, it can be installed horizontally or aslant to meet the needs of different production lines.
Belt Width - 500/650/800/1000mm
Conveying Distance - 3-30m
Belt Speed - 0.80/1.00/1.25/1.60/2.00/2.50m/s
Lifting Height - 0.8~12.5m
Conveying Distance - 3-30m
Belt Speed - 0.80/1.00/1.25/1.60/2.00/2.50m/s
Lifting Height - 0.8~12.5m
Capacity - 25~550m³
Conveyor belt-portable
Belt conveyor trippers are used to unload the material from the belt conveyor at specified location. The belt conveyor tripper is consist of a structure with wheels and pulley assemblies. The wheels can be move along the guide rail on the belt conveyor. The belt conveyor tripper can either be in a fixed position, or travel continuously on the guide rail at a constant speed.
Matching Belt Width - 500/600/800/1000/1200/1400mm
Matching Steel Rail - 15/22kg/m
Walking Speed - 0.26/0.30m/s
Walking Power - 3/5.5kw
Matching Steel Rail - 15/22kg/m
Walking Speed - 0.26/0.30m/s
Walking Power - 3/5.5kw
Walking Wheel Diameter - 400/500mm
Crusher JCE
It is mainly used in metallurgy, mining, chemical industry, cement, construction, refractory, ceramics and other industrial departments for medium and fine crushing of various medium hard ores and rocks.
Opening Size(mm) - 180×1300
Max. Feeding Size(mm) - 150
Discharge Opening Range (mm) - 10-30
Speed of Eccentric Shaft(rpm) - 320
Capacity (t/h) - 12-35
Power (kw) - 30
Max. Feeding Size(mm) - 150
Discharge Opening Range (mm) - 10-30
Speed of Eccentric Shaft(rpm) - 320
Capacity (t/h) - 12-35
Power (kw) - 30
Dimension (mm) - 1320×2150×1175
Crusher PXZ
The Crusher is offered by our company is widely used in metallurgy, building materials, chemical industry, hydropower and other industries. It breaks all kinds of materials with medium or above hardness. It is one of the main equipment for coarse crushing ore or rock. It has the characteristics of large crushing ratio, high production capacity and uniform product particle size. It is suitable for large open-pit mines and beneficiation.
Opening Size(mm) - 700
Max. Feeding Size(mm) - 100
Discharge Opening Range (mm) - 580
Speed of Eccentric Shaft(rpm) - 590
Capacity (t/h) - 310-500
Power (kw) -250
Max. Feeding Size(mm) - 100
Discharge Opening Range (mm) - 580
Speed of Eccentric Shaft(rpm) - 590
Capacity (t/h) - 310-500
Power (kw) -250
Dimension (mm) - 1120×1120×2890
Crusher PF
Impact crusher is an important equipment for secondary crushing. It can crush various coarse, medium and fine materials with maximum size less than 500mm and compressive strength no more than 350MPa. Besides, the crushing specification is various. Now it has been widely used in ore crushing, railway, highway, energy, cement, chemical, construction and other industries.
Rotor Size (mm) - Φ1000×700
Feeding Opening (mm/inch) - 400×730
Max.Feeding Size(mm/inch) - 250
Capacity (t/h) - 15-60
Motor Power (kw) - 37-55
Weight (T) - 9.8
Feeding Opening (mm/inch) - 400×730
Max.Feeding Size(mm/inch) - 250
Capacity (t/h) - 15-60
Motor Power (kw) - 37-55
Weight (T) - 9.8
Overall Dimensions (mm) - 2440×1580×2672
